LT Automatic Power Factor Correction Controller
(3Phases, 3CT / 2Phases, 2CT / 1Phase, 1CT) (Suitable for Contactor Switch)
An inteligent high speed DSP + Microprocessor Based device to measure, calculate, display and store all electrical network parameters. In built Intelligent Multi Method Switching (MMS) Algorithm enables user to get close control on network reactive power requirement. Multi Method Switching (MMS) Algorithm allows user to set different target power factor for Diesel Generators and Windmill Stations. A built in self test facility provided for checking the operation of the relay without external load. The control functions even at low operating loads with great accuracy.
GB Control’s APFC controller find usage and applications in all segments of industry viz Automobile Factories, Cement Plants, Chemical & Fertilizer Plants, Metal Industries, Hospitals, Windmill Power Stations, D .G. Stations Electrical Distribution Network (Utilities) etc.
The other built in features viz Over Voltage Protection, Low Voltage Protection, Under Load Protection, Over Load Protection High Temprature , Storage facility and Communication available through GSM,RS232,RS485 etc. provides nonstop operation of APFC System.
Features:
- Accuracy Class I
- Certified from NABL accredited Laboratory
- DATA memory-45 days on hourly basis
- 2 / 4 Line LCD Display with backlit
- Computerized Test & Calibration Report
- IP-54 Degree
- Highly Sensitive
- Intelligent Multi Method Switching Algorithm
- Four Quadrant Measurement
- Communication port RS-232/485
- Plug & Play Operation
- Plug in Terminal
- Payment Lock Facility
|
Model No. Size |
GB/3L/CSR-08 |
GB/3L/CSR-12 |
GB/3L/CSR-16 |
|
Size (mm) |
144X144X80 |
||
|
Accuracy |
Class-1 |
||
|
Steps Outputs |
08 Nos. |
12 Nos. |
16 Nos. |
|
Operating Input Voltage |
110 To 270 Volts AC |
||
|
Measuring Voltage |
440 Volts AC, 3 Phase, 4 Wire |
||
|
CT Input |
5VA, In/1A, In/5A |
||
|
Output Signal |
230V,5A, Potential free Relay |
||
|
Display Type |
16X2 Line LCD Display |
||
|
LED Indications |
Step ON, Discharge, Fault |
Protections/Fault |
HV, LV, UL, OL, HIGH TEMP, OC, H_THD etc. |
|
Programming Parameters |
Target Power Factor, CT Ratio, Response Time, Discharge Time, Connected Steps, Steps Rating, Fix Step, Fault Limits, Fault Enable/Disable, etc. |
||
|
RS-232 / 485 |
Provided |
||